Xeno3 RGB Kit For thin-neck hilts

This kit is a ready to install Xeno3 RGB board, battery, speaker, switch, rechargeport and LED connector (via JST plug) to allow for the LED to to installed via a thin neck.

Already assembled, this kit is used in place of regular cores when you are installing a thin neck hilt from the Hero range, such as many of the early Redeemer sabers, Master or Royal. Likewise, if you are building your own hilt, this kit can be made to fit many different hilt assemblies – though pay attention to the kit dimensions listed below.

The board is  preloaded with 16 soundfonts (can be extended via an SD card – not included) and different blade effects. Includes recharge USB cable (does not come with DC adaptor – use a 5v output charger ONLY). 

Please be aware that if you are buying this kit, it is expected that you have the technical skills to install it.

*27mm diameter main chassis part is 110mm in length. Switch section is is 24.7mm diameter and 68mm long. LED connector is separate, and connects to the main assembly via a micro JST plug. Wires are approx 160mm extended beyond the chassis body in total. Chassis colour and switch design may vary from picture. Core does NOT include a blade