Fury V2

The Fury is back after a long hiatus, and it’s better than ever!

This saberstaff is one of the most recognisable in the SW universe, and easily takes the number one spot for “most requested addition to the range”. Well, we heard you – and she’s back for good!

Each half of the saber is different, and can be separated to use as two individual hilts, or joined to form the staff version. The switches are cleverly concealed into either the control box on the vented size, or one of the “thumbscrews” on the traditional side. Sound quality is assured with a connector slotted specifically to allow for clear effects, whether used as single sabers or as a staff.

Although it’s very long, it’s extremely well balanced – though it’s worth considering shorter blades if you’re going to use in staff configuration (unless you’re 7 feet tall, you’ll end up hitting the ground with the blades when you spin it). We recommend 32″ or less.

All installed sabers come with a blade (in this case, two of them), charge cable/external battery charger, blade retention screws and spares, as well as instructions. 

Take a closer look at the saber on our video here

This saber isn’t rated for dueling in any installation option. 

Overall hilt length as staff is 640mm, diameter of grip parts between 35mm and 45mm not including the control box or thumb screws. Please note that this is essentially two sabers in one, and therefore the shipping costs are slightly higher than they are for a traditional single hilt.