Fallen Ember (SY01) Switch Segment
This is the switch piece featured on the Fallen Ember (SY01) saber. Is VHC threaded (male one end female the other) but be aware that the FEMALE end is slightly shorter than many VHC male threads, and therefore you may have a small gap between pieces. This can be solved via use of clocking shims or spacer pieces. Switch segment has a 14mm switch hole, no recharge port hole. Mounting is from the back end which features an m4 threaded hole and a slightly smaller unthreaded hole.
Like most Scrapyard parts, this should be compatible with most VHC saber parts (including the Scrapyard series available only from AusSabers, and our good friends at Vire Sabers USA).
Other parts are available in the hilt parts section of our shop. Please pay attention to the dimensions below to ensure this will fit your hilt!
Switch segement is 72mm long, and has a greater diameter of 33mm. Recessed areas on the switch segment are 29mm diameter. Please note that this switch segment does not have a charge port hole (switch only – hole diameter 14mm).