Electris Variant


From: $200.00

The third original hilt from the design studios of AusSabers. This is a one off variant, with the emitter offset at 90 degrees to the regular orientation (via some plumbers tape to tighten the thread of the neck) and with a different pommel and lower grip section, including a covertec wheel module.

The Electris is our first ever thin-neck design (sorry guys, definitely not a dueling hilt!). It takes inspiration from many of the most famous sabers we’ve all come to know over the years, and is one of our smaller hilts to date.

The control box doubles as a switch (simply push on the control box card to activate the plunger underneath). To recharge, simply slide the card out of the way to expose the recharge port underneath.

All installed sabers come with a blade, charge cable/external battery charger, blade retention screws and spares, as well as instructions.

Due to the thin neck, this saber isn’t rated for dueling. It is recommended to choose a shorter blade length with this as the hilt is quite a lot smaller than most.

Overall hilt length 295mm, diameter of grip parts between 30mm and 35mm not including control box

Have a closer look at the saber, with our product video here