Proffie Kit For Thin Necks Including ‘Pixel Blade

This kit is a ready to install proffieboard v2.2, battery, speaker, switch, rechargeport and ‘pixel connector (includes blade – length selected from drop down menu). 

Already assembled, this kit is used in place of regular cores when you are installing a thin neck hilt from the Hero range, such as many of the early Redeemer sabers, Master or Royal. Likewise, if you are building your own hilt, this kit can be made to fit many different hilt assemblies – though pay attention to the kit dimensions listed below.

The board is  preloaded with 32 soundfonts (on the included SD card) and different blade effects. Includes recharge USB cable (does not come with DC adaptor – use a 5v output charger ONLY). 

Please be aware that if you are buying this kit, it is expected that you have the technical skills to install it.

*27mm diameter main chassis part is 110mm in length. Switch section is is 24.7mm diameter and 68mm long. Pixel PCB connector is separate, and connects to the main assembly via a micro JST plug. Wires are approx 160mm extended beyond the chassis body in total. Chassis colour and switch design may vary from picture