Saber Guides

General Instructions

New to sabers? Check out our handy instructions/tips videos here!

To charge the saber:

Use only the charging cable/battery charger provided. You will need to utilise an AC adapter rated at 5V and no more than 2Amps of output. Plug in the charging cable provided and you’ll hear the charger sound out the word “charging”. If there is a switch with an LED on it, this LED will pulse during charging. When charging is complete, the saber will sound out the word”ready”.

If the saber comes with a removable battery and seperate battery charger, the LED on the charger will be red during charging, and green when complete. Blue indicates the battery is either not making good contact with the pins in the charger, or the battery has failed.

(Do not use smart chargers as many of them switch voltages and can damage the electronics of your saber. any use of charging equipment above the specifications above can cause catastrophic damage to the electronics in the saber. never use the saber while it’s plugged into the charger)

For Xeno3 RGB Instructions click here

For Xeno3Pixel Instructions click here

For Proffieboard v2.2 Instructions click here

For older EcoSwing Instructions click here

For older Xeno Instructions click here