XenoPixel Kit Including ‘Pixel Blade
This is the exact same kit as our regular single button and rechargeport XenoPixel kit, but this version doesn’t include the ‘pixel blade
This kit is a ready to install XenoPixel, battery, speaker, switch, rechargeport and ‘pixel connector, designed to fit most LGT VHC sabers such as the Viper, Sentinel, Invictus V1, Defender V1 and several others.
Already assembled, this kit can be installed into most LGT VHC sabers to upgrade the electronics. Likewise, if you are building your own hilt, this kit can be made to fit many different hilt assemblies – though pay attention to the kit dimensions listed below.
The board is preloaded with many soundfonts (on the 16gb SD card) and different blade effects.
Please be aware that if you are buying this kit, it is expected that you have the technical skills to install it.
-Multiple sound fonts built in, with the ability to easily add more.
-Colour change blade and set blade effects
-Can alter configuration to adjust swing sensitivity, gestures and many other features
Some information on how to add fonts/configure the board here
ONLY PROCEED WITH FIRMWARE UPDATE IF YOU KNOW WHAT YOU ARE DOING!!! REFER TO THE INSTRUCTIONS AND VIDEO ABOVE
Previous version of firmware for rollback here
Core is 25.4mm diameter, 190mm length. Switch is 14mm diameter, recharge port is a 2.1mm barrel DC jack.