XenoPixel Kit for thin necked sabers (NO BLADE)
This is the exact same kit as our regular single button and rechargeport XenoPixel kit for thin necks, but this version doesn’t include the ‘pixel blade
This kit is a ready to install XenoPixel, battery, speaker, switch, rechargeport and ‘pixel connector, designed to fit LGT VHC “thin neck” sabers such as the Redeemer range, Master, Royal etc.
Already assembled, this kit can be installed into most LGT VHC thin neck sabers to upgrade the electronics. Likewise, if you are building your own hilt, this kit can be made to fit many different hilt assemblies – though pay attention to the kit dimensions listed below.
The board is preloaded with many soundfonts (on the 16gb SD card) and different blade effects.
Please be aware that if you are buying this kit, it is expected that you have the technical skills to install it.
*27mm diameter main chassis part is 110mm in length. Switch section is is 24.7mm diameter and 68mm long. Pixel PCB connector is separate, and connects to the main assembly via a micro JST plug. Wires are approx 160mm extended beyond the chassis body in total.
Recharge port is a USB-C jack, located behind the speaker.
-Multiple sound fonts built in, with the ability to easily add more.
-Colour change blade and set blade effects
-Can alter configuration to adjust swing sensitivity, gestures and many other features
Some information on how to add fonts/configure the board here
ONLY PROCEED WITH FIRMWARE UPDATE IF YOU KNOW WHAT YOU ARE DOING!!! REFER TO THE INSTRUCTIONS AND VIDEO ABOVE
Previous version of firmware for rollback here